Structure of Optical Fibers
Optical fibers are made of silica or plastic. Generally, optical fibers used in telecom field are s…
Optical fibers are made of silica or plastic. Generally, optical fibers used in telecom field are s…
1. What Are the Benefits of Using 200G AOCs? To address the need for high-density, high-speed netwo…
Non-metallic Loose tube Polyethylene sheathed Duct Optical fiber cables with Aramid yarns are insta…
ITU-T has classified the single-mode fibers into 6 categories or groups as below; 1. ITU-T G.652 (f…
Because of the large amount of storage that is needed for high-performance networking services, suc…
ITU-T recommendation G.657 published on December 2006 had only two versions of Single mode fibers c…
Application Non-metallic duct fiber optic cables are installed for general application purpose for …
The broadening of light pulses, called dispersion, is a critical factor limiting the quality of sig…
The angle at which the core of an optical fiber accepts incoming light; usually measured from the f…
DWDM (Dense Wavelength Division Multiplexing) has been implemented throughout the world by telecomm…
Low water peak fiber as called generally by the fiber optic industry, the ITU-T G.652D compliant op…
The major purpose of optical fibers complying with ITU-T G.656 recommendation is to reduce the grow…
Optical fibers are joined by arc fusion splicing. Fusion splicing procedures include fitting a spli…
Installation of a fiber optic communication system is complicated and it is not simple as plugging …
Semiconductors have revolutionized the electronics industry. Almost all modern devices and equipmen…
Commenting on the results of the study, Vincent Garnier, Director General of the FTTH Council Europ…
Optical attenuator is used to reduce the optical power level of an communication signal, in an opti…
One of the biggest revolutions in human history was the start of the use of electromagnetic waves f…
The first introduced single mode fibers belonged to G652.A category. G.652.B category is an improve…
Optical fibers loaded at the Fiber pay-offs need some tension in order to maintain a constant payin…
Nowadays, a huge number of bandwidth-hunger devices are housed in data centers, like clustered stor…