Magnet wire/anodized wire is an extremely durable insulated wire used primarily for high-frequency magnetic fields. It is comprised of a hollow inner core made from steel, aluminum, or any other lightweight aluminum alloys encased in a thin non-conductor layer of insulation.
Copper anodized copper wire and copper enamel-coated wire are both manufactured in this manner. These wires can be wound and braided into conductors, as well as soldered into wires for mounting to equipment or in-wall electrical panels. The anodized wire has a very low resistance to static electricity and it is highly recommended for use in electrical applications, but these types of wires may not be suitable for low frequency (ELF) applications.
This type of wire is commonly used in power applications, such as on generators or transformers, but it is also popular in applications where power is used in alternating magnetic fields, such as in industrial machines or MRI devices. The strength of an anodized wire depends upon the anodizing treatment given to the wire prior to manufacture. This is usually accomplished in a procedure known as “cold working” hot working.” During this procedure, the wire is coated with a protective layer of an acidic solution, which allows it to retain its strength and flexibility. The procedure can also be completed on a galvanized wire prior to installation, or by electroplating. Either method, the anodized wire must be fully cured in order to be usable.
Two types of wire manufacturers offer these specialized wires: domestic and industrial. Domestic anodized copper wire can be found at your local hardware store and can be used as a starter wire if you do not yet have your own generator or transformer to work off of. Domestic wires are relatively inexpensive and will generally last for a good while.
An industrial magnetic field wire manufacturer will typically charge a higher price for their product than the domestic manufacturer. Because of this price difference, there may be a reason why you need to purchase a wire rather than simply buy an individual wire. If you are looking for a very long and heavy conductor that can be used for high-frequency applications, you will want to go with a manufacturer who offers this type of wire in bulk. If you are only looking to run one or two-wire runs through a certain type of generator or machine, it may be more economical to buy an individual wire and install it yourself.
Copper wire is usually sold in rolls. The rolls can be purchased in single and double-layered varieties. Double-layered rolls of copper wire are much stronger than single-layered rolls because they contain two layers of insulation instead of just one. Double-layered rolls are great for applications in applications where multiple layers are needed. The double-layered rolls tend to be more resistant to static electricity and have less electrical resistance than single-layered rolls.
Fuda enameled wire manufacturer will offer these rolls in a number of different diameters. A standard roll of copper wire is 1 foot long. For heavy-duty application, however, it is possible to find rolls that are over 3 feet in length.
The cost of these wire products depends upon the diameter of the wire, the amount of insulation it contains, and the thickness of the coating. This cost can be quite significant, but some manufacturers will charge slightly more if you purchase rolls with larger diameters, more insulation, and thicker layers of insulation on the wire. If the wire is being purchased for a high-powered application, then these costs will be substantially higher.
If you are looking for a wire that is not readily available in your area, you may want to check out the internet. You will have access to the largest selection of wire for sale anywhere. You can also read reviews of companies to see which ones offer the best products.
Post a Comment