Cat6 and Cat6a Cables: Comparison and Differences


Probably one of the most frequently asked questions in the telecommunication market is which cable performs better and why is it. Such questions are likely to cause much confusion, becoming commonplace for those staff who work on cabling installation projects. Some cabling installers even argue against each other and keep their own instances on the better cable that they think is suitable for networking use. The case is also true when it comes to the selection of Cat6 and Cat6a. Some prefer to the Cat6, while some choose the Cat6a. In this article, a comparison will be made on these two kinds, with the aim to help you better understand the differences between them.

Both Cat6 and Cat6a are unshielded twisted pair UTP or shielded twisted cables, suitable for Gigabit Ethernet (GbE) and other network physical layers. They are backward-compatible with Cat3, Cat5 (a cable type widely used in GbE applications in combination 1000BASE-T SFPs, eg. GLC-T). Each deploys four twisted pairs in a common jacket to transmit data by using the same style RJ-45 jacks and plugs. When compare Cat6 with Cat6a, it seems that the only difference lies in the single lowercase letter—a standing for “augmented” that sets the two apart. However, differences are not limited to this one point.

images of Category 6 and Category 6a cables

Cat6 vs. Cat6a: Physical Properties

Firstly, Cat6 and Cat6a have their own identifiers printed on the cable jacket itself, so this provides a quick way to tell them apart. Secondly, Cat6a is thicker and bulkier than Cat6 just looking from outside. Thirdly, in terms of wiring structure, Cat6 is made of tightly twisted pairs of copper wires with extra insulation to reduce crosstalk, while Cat6a takes things even further by additionally twisting each pair around a flexible central plastic support.

Cat6 vs. Cat6a: Speed & Distance

It’s known that Cat6 and Cat6a are all designed for GbE and other standard network protocols, both being suitable for 10BASE-T, 100BASE-TX, 1000BASE-TX, and 10GBASE-T. (Certainly, 1000BASE-TX standard can also operate over Cat5 cables, such as SFP-GE-T.) At first sight, there is no big difference. But the real points come when you consider their transmission speed and distance. Cat6 cable is rated for 250MHz, and when used for 10GBASE-T applications, the maximum length ranges from 33m to 55m. In contrast, Cat6a doubles that capability by performing at up to 500MHz, allowing 10GBASE-T to be run over longer distances of up to 100m.

Cat6 vs. Cat6a: Crosstalk

Crosstalk happens when a signal from one channel or circuit interferes with another channel or circuit’s signal. Cat6a has lower-level crosstalk than Cat6a. Such reduction owes to alien crosstalk (AXT), which refers to the cables interfering with the signals of other cables in close proximity. This AXT phenomenon is significant in Cat6 which is exposed to high frequencies but quite low in Cat6a.

no-crosstalkCat6 and Cat6a Cables: Comparison and Differences 1

Cat6 vs. Cat6a: Durability

Due to the new central column support and ubiquitous shielding, Cat6a is much heavier and bulkier than the Cat6 just as what has been mentioned above. Cat6a takes more room, so that cable trays will not hold nearly as many Cat6a cables as they can for Cat6 cables.

Although Ethernet cables may seem sturdy on the outside, their inner parts are so fragile. To put in in another way, it is ill-advised to bend cables or cause the winding of cables too much, as this can damage wiring and lead to performance degradation. Because of their bulkiness, Cat6a cable has a smaller bend radius than Cat6 cable.

Cat6 vs. Cat6a: Cost

Compared with Cat5e cables, Cat6 and Cat6a cables are more expensive, which mainly dues to the cabling length. But the cost differences between Cat6 and Cat6a cables are not so distinctive, or in other words, relatively small. For example, 5m Cat6 twisted pair patch cable sells at US$ 6.10 in Fiberstore, and the same length of Cat6a twisted pair patch cable in Fiberstore costs US$ 7.70.


In summary, Cat6a allows long-distance transmission for 10GbE applications and reduces crosstalk, but it’s bulkier and heavier than Cat6. When you are at a loss about whether to choose Cat6 or Cat6a cables, it’s imperative to outweigh the benefits against drawbacks for your specific applications, then you can make a wise choice. Fiberstore offers various Ethernet cables for your copper networks, including Cat5, Cat6, Cat6a, and so on. For more information about Cat cables, you can visit Fiberstore.

Related Articles

24AWG vs 26AWG vs 28AWG Ethernet Cable: What Is the Difference?

Which Ethernet Cable type should you use?

Shielded vs Unshielded Ethernet Cable: Which Should You Use?

Will Different Ethernet Cable Speed Affect My Network?

Cisco Transceiver Module: GLC-T vs GLC-TE


Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.