Fiber Optic Social Network

Prysmian Introduces World’s First 180µm Fiber Cable for FTTx and 5G Networks

Optical fibers are getting smaller and smaller to the deployment challenges raised by the applications. As telecom operators also started looking for high fiber count cables in reduced diameters, optical fiber and cable manufacturers have been investing in research and development to realize smaller fibers and cables. Prysmian becomes the first company to release a portfolio of cables that make use of optical fibers having a diameter of 180µm (micrometers). These cables will be deployed for FTTx and 5G networks.

In a press release, Prysmian Group announced the launch of the world’s first commercially available 180µm fiber cable. Further to previous announcements for BendBrightXS 180µm fiber and Sirocco HD cables, Prysmian combines the two technologies to launch its Sirocco Extreme microduct cable with 288 fibers in a diameter of 6.5mm, providing world record diameter and fiber density for a blown microduct cable of 288 fibers. With a fiber density of 8.7 fibers per square millimeter, it is possible to install the cable into an 8mm ID duct where previously it was only possible to install up to 192 fibers.

Sirocco Extreme microduct cables utilize Prysmian Group’s BendBrightXS 180µm single-mode bend-insensitive fiber (ITU-T G.657.A2), providing a solution that’s ready for evolved systems and future-proof.

Prysmian’s BendBrightXS fibers are capable of providing the necessary standard of cable density, and of supporting the necessary fiber spectrum demanded by new PON technologies states Ian Griffiths, Director R&D Telecom Business at Prysmian Group. Bend-insensitive fiber’s resilience gives manufacturers the ability to design cabling solutions which were previously impossible to create, but are now demanded by today’s rapidly changing environments.

With their extreme fiber count and reduced diameter, Sirocco Extreme microduct cables make installation faster, more cost-effective, and environmentally friendly. Designed for installation into micro ducts, they are perfectly fit for blowing in high-density access, FTTx, and 5G networks and offer a scalable solution that’s high-density, physically compact, and easily deployable for a future-fit solution.

Sirocco Extreme is currently available in a fiber count of 288 with further fiber counts to be available later in the year. The cable conforms to international standards for optical and mechanical performance and benefits using Prysmian’s PicoTube technology making them up to 40% smaller than Sirocco microduct cables.

This makes it possible to install more fibers into congested duct space and enables the use of smaller ducts for new installations, resulting in lower installation costs and the use of less raw materials. This provides benefits for both the total cost of network deployment and the environmental footprint.

As the world’s demand for information continues to increase, fiber networks are becoming more dynamic, crowded, and limited for space, and Sirocco Extreme product enhancements show once again the Group’s commitment to respond to these evolving needs of the market.

Related News

Prysmian to Showcase 6,912 Fiber FlexRibbon Cable at OFC

Sumitomo and Optoscribe Cooperate for Multicore Fiber Components

Nexans Expands its Connected Drums Service Solution

HFCL Plans Expansion of Fiber Cable Manufacturing Capacity

Understanding Fibre Patch Leads Types