Today, our lives hardly do without Internet communication. We do shopping, letter writing and business all relying on the Ethernet connections both at home and office. And Gigabit Ethernet switch and splitter are the networking devices that are primarily used for connecting different computers or other networking devices. However, they are quite different. Here focus on Ethernet switch vs splitter.
Ethernet Switch vs Splitter: What Are They?
First, let’s figure out the definitions of the two terms.
An Ethernet switch is a high speed networking device that provides more ports for subnets to connect more computers, printers, cameras and so on in a building or campus. Through the ports, the data switch can receive incoming data packets and redirects the data to their intended destination within a LAN. Usually, an Ethernet switch not only works at the data link layer which is also called layer 2, but also can operate at the network layer (layer 3) or above.
A network splitter acts as the optical power distribution device, like a coaxial cable transmission system. It’s one of the most important passive devices which means it doesn’t need external power except for light. As the name implies that it can split a single Internet connection to create extra connections, as a result the additional or other computers on a network could be connected.
Ethernet Switch vs Splitter: What Are the Differences?
Ethernet switch can be used for networks that include different devices, for example, a computer and a video game console or a printer. In addition, general switch needs a power input so that it can divide an Ethernet signal into various signals, and the signals can operate at the same time. As a result, different devices can be connected by the switch and work simultaneously.
As for Ethernet splitter, there is no need for power input. And splitters need to be used in pairs. It physically splits a single Ethernet connection into two connections. Simply put, if you want to connect two computers in one room and a switch in another room, then you need the splitters. Instead of using two Ethernet cables from one room to another, the splitters can physically split one Ethernet cable into two to connect the computers and the switch. This is the main principle for the issue that how to use Ethernet splitter.
Ethernet Switch vs Splitter: Where to buy?
The following products of Ethernet splitter vs switch are from FS.COM.
This is a 10gb Ethernet switch that has 48×1GbE SFP ports and 4×10GbE SFP+ ports. With a switching capacity of 176Gbps, it supports comprehensive L2 and L3 network management features. The switch offers MLAG, MPLS, IPv4/IPv6, SNMP etc. Designed with the max power draw of 75W and switching capacity of 176Gbps, this switch is ideal for traditional or fully virtualized data center.
Figure 1: S5800-48F4S Switch
This bare fiber splitter uses a design of small size with steel tube. With an insertion loss≤7.3dB and return loss≥50dB, it can satisfy the transmission needs of different wavelengths so that it’s widely used in EPON, GPON, FTTH/FTTX network.
Figure 2: Bare Fiber PLC Splitter
As for Ethernet switch vs splitter, we have known how do Ethernet splitters work and how do switch work. Both of them can optimize our network that allow us to work in an efficient and high secure way. Welcome to visit FS.COM to pick your own Ethernet switch and splitter.