Fiber Optics

How to convert QSFP to RJ45 for Network Connection

We know that in the present market, there are different types of ports for switches, such as RJ45 port, SFP+ port, QSFP port and etc. Generally speaking, the more ports a switch is equipped with, the more devices the switch can be connected to. Different ports enable switches to other devices via fiber or copper. So what are the different between these ports? How should we wire them respectively? How get different ports connected? Here in this article we will mainly focus on QSFP Port and RJ45 Port.

QSFP to RJ45: What Is QSFP Port

The QSFP port is to be inserted for 40 Gbps transceiver module that offers high-density 40 Gigabit Ethernet connectivity options for data center and high-performance computing networks. The QSFP transceiver module is a hot-swappable, parallel fiber-optical module with four independent optical transmit and receive channels. These channels can terminate in another 40 Gigabit Ethernet QSFP+ transceiver, or the channels can be broken out to four separate 10 Gigabit Ethernet SFP+ transceivers. The QSFP+ transceiver module connects the electrical circuitry of the system with either a copper or an optical external network.

40 gbps transceiver

QSFP to RJ45:What Is RJ45 Port

Unlike QSFP, which is used to support QSFP modules. RJ45, incidentally standing for registered jack 45, is the ubiquitous Ethernet style data port found on switches, routers and network cards. The RJ45 style connectors and ports are also commonly found on Ethernet, serial and ATM IMA cards and interfaces. However, the most common use by far is with Ethernet data connections from desktop PC network cards, Wi-Fi access points, data switches and routers in home and corporate networks. For twisted pair cables like cat5, cat6 and cat7 etc, they are all with RJ45 connectors.

RJ45 connector

Solution for QSFP to RJ45

Now we know QSFP and RJ45 are different ports which can be used by different transceivers. The QSFP spec is different from RJ45 spec. The former is to be prepared for QSFP modules, while the latter is designed to support GBIC, SFP and SFP + modules. So the to connect QSFP to RJ45 port cannot be achieved directly. Good news is that currently we’ve got product like QSFP+ to 4 x 10/100/1000BASE-T (RJ45) Breakout Cable. For this breakout cable, one connector is QSFP and the other connector is 4 x RJ45, thus we can easily get a connection between QSFP and RJ45.

What you think? Leave a Reply